Specifications
Meters:•LED ladders displaying 24 channels, 24 LEDs per channel from
• 20 Hz – 20 kHz ±0.5 dB
Crosstalk (@ 1kHz)• | Adjacent channels: | |
• Aux sends feed through: | ||
• | Main outputs: |
• | Gain Range: | ±15 dB |
• | Frequency range: | 20 Hz – 20 kHz |
|
| split into 4 bands |
• | Q: | 1/12 to 3 octave |
• | Threshold: | |
• | Attack: | 0.1 ms to 2.5 sec |
• | Release: | 10.0 ms to 2.5 sec |
• | Ratio: | 1.0:1 to inf:1 |
• | Output: | 0.0 dB to 20.0 dB |
• | Threshold: | |
• | Attack: | 0.1 ms to 2.5 sec |
• | Release: | 10.0 ms to 2.5 sec |
•Range (Expand off): 0 dB to 100 dB
•Ratio (Expand on): 1:1.0 to 1:inf
Digital Specs•Converters:
•DSP:
32 bit (>190 dB dynamic range)
•CPU:
300 MHz Celeron
(166 MHz Pentium in earlier versions)
•Minimum System Requirements for v5.1:
32 MB RAM
166 MHz Pentium D8B CPU
•Recommended System Requirements for v5.1: 64 MB RAM
300 MHz Celeron D8B CPU
File Storage:•Floppy drive, internal hard drive or
• Apogee UV22
•Output Level (0 dBu = 0.775V RMS)
•Left and Right Outputs:
+22 dBu balanced 1/4" TRS
+28 dBu balanced XLR
•Bus (Tape) out:
+22 dBu balanced 1/4" TRS
•Aux sends:
+22 dBu balanced 1/4" TRS
•Inserts:
+22 dBu unbalanced 1/4" TRS
Channel Section (mic/line)•Line input: balanced 1/4" TRS input
•Mic Input: balanced XLR input
•Preamp dynamic range:
|
| 114 dB max. |
• | E.I.N.: | |
|
| |
• | CMRR: |
•Distortion: 0.005% @ 1kHz +14 dBu output level (20 Hz – 20 kHz filter)
• Mic gain range: | Unity to +60 dB |
•Line In gain range:
• Input max. level: | +4 dBu nominal |
| +22 dBu clipping |
•Aux send gain range: off to +10 dB
•Bus out gain range: off to +10 dB
• Threshold: |
• Ch. fader gain range:
•Console:
8.7" x 37.6" x 27.1" (221mm x 955mm x 688mm)
•Remote CPU:
5.25" x 19.0” x 20.0" (133mm x 483mm x 508mm)
Weight• | Console: | 73 lbs. (33.1kg) |
• | Remote CPU: | 50 lbs. (22.7kg) |
Note: All specifications subject to change without notice.
D8B Manual • Chapter 1 • page 17