FX Routing
The Plug-in Configuration WindowInput Source | Plug-in |
Assignment | Assignment |
Card Slot Column Column | Column |
| | Stereo/Mono | Close Window |
Plug-in | | Mode Column |
display toggle | | | |
| | | Destination |
| | | Assignment |
| | | Column |
Card A | | | |
| | |
Card B
Card C
Card D
Stereo/Mono
Toggle Button
Inserting a Plug-in into a Channel
Apre- or post-DSP channel insert can also be used as the input source for a plug-in. When a channel insert point is selected, the plug-in output returns to the channel by default. The FX return path is disconnected, although the plug-in output is still displayed on the FX return channel meter.
A plug-in channel insert assignment can be made from the Plugin Configuration window, or from a pull-down menu from the mixer screen.
Post-DSP Pull-down
Plug-in Configuration Window | Pre-DSP Pull-down |
This assignment can also be made from the control surface and VFD by holding the desired channel’s SELECT button for two seconds, then paging over to Plug Pre or Plug Post, selecting the input source, then selecting the desired plug- in slot from the follow-on menu.
D8B Manual • Appendices • page 155