TALKBACK TO STUDIO button

Routes sound arriving at the in-panel Talkback mic to the Studio outputs.

Note: Make sure the speakers that are connected to the Studio Outs are located in another room to avoid feedback when the TALKBACK TO STUDIO button is depressed.

CLEAR SOLO button

Disengages all engaged solo buttons throughout the entire console. This is especially convenient considering sections may be soloed across multiple fader banks.

SOLO LEVEL button

Assigns the V-Pot in the Studio/Solo section to adjust the solo level being fed to the Control Room outputs. Not applicable to mixdown solo (use L/R fader to adjust mixdown solo level).

STUDIO LEVEL button

Assigns the V-Pot in the Studio/Solo section to adjust the output level being fed to the Studio monitor system.

TALKBACK LEVEL button

Assigns the V-Pot in the Studio/Solo section to control the preamp level for the in-panel Talkback Mic.

RUDE SOLO LIGHT

Blinks whenever a Solo button is engaged.

Phones/Cue Mix Section

PHONES/CUE MIX 1

PHONES/CUE MIX 2

AUX 9-10

COPY MIX TO CUE

AUX 9-10

COPY MIX TO CUE

AUX 11-12

CONTROL ROOM

AUX 11-12

CONTROL ROOM

 

LEVEL

 

LEVEL

Phones/Cue Mix 1 and 2 select the sources and sets levels for the Phones outputs.

AUX 9-10

Assigns the Aux 9-10 mix to the Phones output.

AUX 11-12

Assigns the Aux 11-12 mix to the Phones output.

COPY MIX TO CUE button

Pressing this causes all channel settings to be copied to the channel V-Pots for the selected CUE MIX 1 (Aux 9-10), CUE MIX 2 (Aux 11-12), or aux pair (Aux 1-2, 3-4, 5-6, or 7-8). This is a very quick way to copy the MASTER L-R mix, including effects, to the phones output, which can then be easily fine-tuned.

CONTROL ROOM button

Assigns whatever is selected in the Control Room section to the Phones output. Solos are also routed to the Phones output when Control Room is selected.

LEVEL V-Pot

Adjusts the Phones output level.

Control Room Section

These buttons:

•Select the source for the control room outputs.

•Select Main or Nearfield control room outputs.

•Adjust the listening level.

CONTROL ROOM

2 TRACK A

DIGITAL IN 1

2 TRACK B

DIGITAL IN 2

2 TRACK C

MASTER

 

L-R

 

MONO

NEAR FIELD

MAIN

SPEAKERS

SPEAKER LEVEL

DIMTALKBACK

2 TRACK A, B, and C buttons

•Selects the signal at the 2 Track A, B, or C in- put as the Control Room source.

•These inputs can be selected independently or together for simultaneous playback along with the MASTER L-R button.

Note: When DIGITAL IN 1 or DIGITAL IN 2 are selected, MASTER L-R and 2-TRACK inputs are unavailable.

D8B Manual • Chapter 2 • page 34