ENGLISH

System Settings

Provides a series of menus to allow you to change the hardware configuration on your Music Server:

The following table summarises the settings available on each of the System Settings menus:

OptionDescription

Network Mode

Modem Settings

Ethernet Settings

Controller Settings

Video settings

Remote Diagnostics

Specifies whether your Music Server connects to the Internet via the built-in modem or using the Ethernet port.

Allows you to specify the following settings when connecting via the built-in modem: number of connection retries, the Assigned IP address and the Server IP address, the modem initialisation string, and whether to use tone or pulse dialling.

Allows you to specify the following settings when connecting via the Ethernet port: IP address mode, IP address, IP Mask, Gateway, IP DNS1, IP DNS2.

Specifies the communication speed for the Controller port on the rear of the unit.

Specifies whether the unit is configured for PAL or NTSC use.

Select this option if instructed to set up your modem to receive incoming calls from Marantz technical support staff.

Output Settings

The volume setting of each individual output of the Music Server may be configured as either variable or fixed.

If the volume setting is set to fixed the output level is set to maximum and the balance is set to the central position. In this mode the N and O Mute keys on the Music Server remote control do nothing*.

If the volume setting is set to variable the output level can be altered at any time using the N and O Mute keys on the Music Server remote control. A Balance option is also available from the Volume Settings menu which allows you to adjust the left/right balance.

*Note: The Music Server remote control can be configured so that when the HDD Audio device is selected the N and

OMute keys operate the volume and mute controls on an amplifier. For more information see the chapter called Configuring your remote to control other devices p.11.

26

Page 28
Image 28
Marantz DH9300 manual System Settings, Output Settings