Maxtor MV-DR3000 operation manual Menu Setup, Alarm / Motion Setting

MENU SETUP ( continued )

5.5F/S, 2.4F/S, 1.22F/S, 0.71F/S, 1 F/4S, 1F/6S, and 1F/8S.

zFor a PAL unit there are 11 different recording rates you can select from: 50F/S (50 fields per second), 25F/S, 17F/S, 10F/S, 5.5F/S, 2.9F/S, 1.52F/S, 0.88F/S, 1 F/4S, 1F/6S, and 1F/8S. Please refer to the table in section 3.1 for details.

NOTE: The 60 f/s (50 f/s for a PAL unit) recording rate can only function in a 352x240 (352x288 for a PAL unit) resolution.

REC QUALITY:

This option determines the image quality to be recorded. The DVR stores images in the compressed format and allows the image quality to be altered by the image size. There are 4 levels of image quality you can select from: BEST, HIGH, STANDARD, and BASIC. Selecting the BEST image for use provides higher-resolution recorded images, and normally takes up more storage space than a HIGH, STANDARD or BASIC image does.

DISK FULL:

This option determines the way to utilize storage media in case of a full disk. REWRITE: When the hard disk is full, the device continues recording by displacing the old data.

STOP: When the hard -disk is full, the device will stop recording.

AUDIO:

This option determines the way to record sound if necessary.

OFF: Disables AUDIO recording.

11 KHz: Enables AUDIO recording.

22 KHz: Enables AUDIO recording.

NOTE: Audio function can only be activated at the following refresh rates in NTSC(PAL): 60(50), 30(25), 20(17), 10(10), 5.5(5.5) fields/sec.

MULTIPLEXER:

For optimum image recording please set this option to ON when the DVR is connected to a

multiplexer for use. Set this option to OFF when it is only connected to a single camera or Quad processor.

TEXT INSERTION:

Please refer to Chapter 6. TEXT INSERTION FUNCTION for more details.

NOTE: The Text Insertion activates both the text data and the channel information in a DVR, and the remote viewer software takes effect after this option has been turned on.

4.2 ALARM / MOTION Setting

MAIN MENU

RECORD

ALARM / MOTION

CLOCK/ TIMER

COMMUNICATION

DISK

SYSTEM

GOTO ALARM/ MOTION PAGE

This menu allows users to program the configuration of alarm recording only when an alarm input is activated. The device will record as long as the alarm input is activated.

MAIN MENU

RECORD

ALARM / MOTION

CLOCK/ TIMER

COMMUNICATION

DISK

SYSTEM

GOTO ALARM/ MOTION PAGE

ALARM/ MOTION

ALM OPERATION		: OFF
REC RATE		: 30 F/S
REC QUALITY		: BEST
AUDIO		: OFF
ALM TYPE		: NO
ALM DURATION		: 0 SEC
PRE-ALARM		: OFF
MOTION SETTING
	MAIN PAGE

ALM OPERATION:

This option determines whether to activate

32