Maxtor MV-DR3000 operation manual Change Record / Alarm Setting, Change Timer Record Setting

5.3.2 Change Record / Alarm Setting

Please follow the steps given below to change the Record / Alarm setting through the network as and when necessary.

1.Click the button on the home page to enter the Record / Alarm setting page.

2.Adjust the Record / Alarm setting, including “REC rate”, “REC quality”, “ALARM REC enable”, “ALARM REC rate”, and “ALARM REC quality” as and when necessary.

3.Click the button to submit the new Record / Alarm setting.

4.Click the button to return to the home page while the new image setting acts on the images to effect the desired changes instantly. (If the setting has not been changed by the above steps, any (re)entry to the home page will find images in their earlier or original setting. )

5.3.3 Change Timer Record Setting

1.Click the button on the home page to enter the Record / Alarm setting page.

2.Click the connection on the

56

Record / Alarm setting page to enter the Timer Record setting page.

3.Set the TIMER RECORD to ON to enable the TIMER RECORD function.

4.There are two time-periods available for scheduling each day. The Timer Record setting page allows users to program the time each day that the DVR will start and stop recording. The time is displayed in a 24-hour clock format. If there is a time overlap showing between two continual time-period settings, the device will automatically combine the two time-period settings into one combined time-period setting.

5.Click the button to submit the new Timer Record setting.

6.Click the button to return to the home page while the new image setting acts on the images to effect the desired changes instantly. (If the setting has not been changed by the above steps, any (re)entry to the home page will find images in their earlier or original setting. )