Maxtor MV-DR3000 Display button, Search button, Left / Right buttons, Up / Down buttons

3PAUSE button:

In a playback display, press this to freeze the display. During the freeze, press to display one frame/field of a picture at a time in the forward direction. (A green light is on the PAUSE mode.)

4PLAY button:

Press to play back a recorded video from the hard disk. (A green light shows in the PLAY mode.)

5STOP button:

Press to stop playing back a recorded video. (A green light goes on in the STOP mode.)

6REC button:

Push to start recording video into a hard disk while in the live display mode. (A red light turns on in the REC mode.)

7POWER button:

Press this button for at least 3 seconds to power off. Press again to activate the device.

8DISPLAY button:

Press to show the system operation status on the screen.

9Setup button:

Press this to enter the setup menu. Press again to exit the setup mode.

10Search button:

Press to enter the search mode to access the recorded video.

11	14	Left / Right buttons:
		Press the two buttons to highlight desired items in the menu setup mode. For the Key Lock
		operation, press these two buttons simultaneously once; to disable Key Lock, press these two
		buttons again simultaneously.
12	13	Up / Down buttons:
		Press these two buttons to select the desired contents for programming in the setup menu mode.

15Enter Button:

Press to enter a selected item and save the setting in the menu setup mode.

16Monitor button:

Press to switch between a multiplexer-decoded video and the encoded video to be displayed when connected with a multiplexer. When the button light is on it indicates the unit is displaying the decoded video.( The images are not multiplexing . ) In this mode, the unit doesn’t display the OSD message of the unit on the screen. However, this doesn’t affect the unit’s OSD message, which is recorded into hard-disk drives. When the button light is off it indicates the unit is displaying encoded video. (The images switch swiftly).

17

18

19

T-rec Indicator:

This indicator of the timer recording mode lights up to signal the scheduled record setting is on.

A-rec Indicator:

This indicator of the alarm-recording mode lights up to indicate the alarm record setting is on.

DISK Indicator:

The indicator shows the operation status of the unit’s hard-disk drives. The green light indicates the hard-disk drive is storing or retrieving data. The red light signals the hard-disk drive is filling up.

6