Maxtor MV-DR3000 operation manual Recording, Playback

3.2.3.1 Full Text Display Mode.

All the incoming TEXT data are shown in the middle of the screen; the previous data is scrolled up when the latest one arrives.

3	ALE	.58
4	PLUM RED	.68
1	10-01-97	10:53P
2	NECTARINES	1.78
3	10-01-97	11:20P
4	MILK	5.72
1	SM TOMATOS	.48
2	CLASSIC COKE	.58
3	BREAD	.98
4	BANANAS	1.52

01-05-2006 14:26:25

If the TEXT INSERTION option has been set as VSI-ADD, and incoming texts come from different channels.

A percentage bar in the right-lower corner reveals the text data usage. For example, if the total number of text data is 65536 and the number of the current used text data is 32768, the bar will be shown about 50% full. For the precise number please refer to SETUP/ SYSTEM/VERSION in the local device OSD.

3.2.4 RECORDING

When the text data continuously inputs from the Text device, press the REC button to activate recording; while the DVR is in the RECORD mode, there is a small red ball periodically flashing in the right-upper corner of the screen. Please press the DISPLAY button to switch to a desired mode to observe the incoming TEXT data.

.

To stop recording, please press the REC button and hold for more than3 seconds before releasing.

3.2.5 PLAYBACK.

Press the SEARCH button to enter the Search Menu, highlight a desired item in the list, and then press the ENTER button to start playback. During playback, the DISPLAY can also be used to switch to the display modes, to see the Text data that was received when the corresponding video was recorded. The Text data is shown even in the trick play mode, like fast forward and slow motion.

If the TEXT INSERTION option has been set as VSI-ADDand incoming texts come from different channels.

67