NOTE: If the device is already under recording mode before an alarm occur, the
MOTION SETTING:
The motion detection function is convenient for people without an alarm trigger input, but it can also used be with an alarm trigger input. If this function is enabled, object’s movement will trigger the alarm recording just like the outside trigger signal. Before using the motion detection function, please turn the ENABLE option to ON, and set the SENSITIVITY (1 ~ 5) to a suitable value.
NOTE: The MOTION ENABLE option is not allowed set to ON when MULTIPLEXER option is set to ON in the RECORD page, it is because the motion detection function is for single camera only.
MOTION SETTING
MOTION ENABLE | : ON |
SENSITIVITY | : 3 |
REGION | : SET |
MAIN PAGE
SET MOTION REGION
( 30 , 40 ) - ( 99 , 99 )
MOTION ENABLE:
This option enables / disables the motion detection.
ON: Enables the motion detection.
OFF: Disables the motion detection.
SENSITIVITY:
This option allows users to set the motion sensitivity. 1 is the most sensitive setting. 5 is the least sensitive setting.
REGION:
This option allows users to set the motion region.
4.3 CLOCK / TIMER Setting
MAIN MENU
RECORD
ALARM / MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
GOTO CLOCK/ TIMER PAGE
The DVR provides a weekly table consisting of two periods of time each day for scheduled recording. This option allows you to set the time each day when the DVR will start and stop recording.
MAIN MENU
RECORD
ALARM / MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
GOTO CLOCK/ TIMER PAGE
| CLOCK/TIMER |
|
CLOCK | :SET | |
| DAYLIGHT SAVING | :OFF |
| REC ENABLE | :OFF |
| TIMER | :SET |
| TITLE | :SET |
| MAIN PAGE |
|
|
|
|
CLOCK:
This entry allows users to set the system time.
34
