Mellerware 26550550W manual Program Setting Times and Display Information

Program Setting Times and Display Information.

The LCD window will tell you if there is a problem with your Ma-baker Pro. Always use your Ma-baker Pro in a room free of drafts. Do

not use your Ma-baker Pro outdoors, near a heat vent or in direct sunlight.

DISPLAY READS	PROBLEM	SOLUTION
“ 0:00” (:) flashing	Select program setting.	Use the Menu button to
		select program.
“ E:01” flashing	The baking chamber is too	Open the lid and remove
	hot to begin another cycle.	bread pan to cool the chamber.
		After the panel message
		disappears, put the bread pan
		back into the chamber and
		press START again.
“ E:02” flashing	Sensor malfunction.
“ E:03” flashing	Sensor malfunction.
		Contact Customer Service
“ E:04” flashing	CPU malfunction
		on the Share call number
		086 111 5006.
“ E:05” flashing	Heater control malfunction.
“ E:08” flashing	Heater control malfunction.

Note: After baking a loaf of bread, it is recommended to cool the breadmaker down to room temperature as temperatures above ambient reduce the rising height of the bread due to the sensitivity of yeast.

You will hear a beep when:

The power is turned ON	Long beep
Select a setting from the Menu	Short beep
Invalid key-in	Long beep
Commencement of baking cycle	2 long beeps
Completion of bread baking process	Short and Long beeps

76