Adjusting the LCD Display | Micron Technology Transport LT specification

Introducing Your TransPort LT

Adjusting the LCD Display

Support (1.888.FIXMYPC or 1.888.349.6972). (See ”Troubleshooting” on page 139.)

Adjusting the LCD Display	You may wish to adjust the LCD (Liquid-Crystal Display) when you begin using
	your computer. A TFT (Thin-Film Transistor) LCD does not require adjustment for
	contrast because the contrast is set to remain at maximum.
	To adjust the LCD:
	• Press [Fn+Up Arrow] to increase the display brightness.
	• Press [Fn+Down Arrow] to decrease the display brightness.
NOTE:	When the AC adapter is removed and the system is using battery power, the
	brightness level will decrease.
Turning Off Your Computer
NOTE:	If your computer has a Windows (98, NT 4.0, 2000) Operating System, turn off
	your computer by performing the shutdown procedure described in this section.
	Otherwise, you may lose data.
APM Mode	Advanced Power Management (APM)
	To turn off the computer:
	1. Click Start on the taskbar.
	2. Click Shut Down.
	3. Select the Shut Down option.
	4. Click OK.
	• If the Operating System is Windows 98 or Windows 2000, the computer
	turns off.
	• If the Operating System is Windows NT, you will receive a shutdown
	message and you must press the power button to turn off the computer.
Restarting Your Computer	You may need to restart (reboot) your computer when installing hardware or
	software or if the computer does not respond to your input. A warm (or soft) boot

22

Image 22

Micron Technology Transport LT Adjusting the LCD Display, Turning Off Your Computer, Restarting Your Computer, APM Mode

Contents

BGJ TransPort LT User’s GuideCopyright Notice User’s Guide Copyright Notice This page intentionally left blank Table of Contents Drive Image System Requirements 159 149155 161 This page intentionally left blank Further Reading WelcomePurpose Areas Covered Welcome Areas Covered Manual Comments WarrantyManual Conventions Special Text This page intentionally left blank Unpacking the TransPort Getting StartedGetting Started Unpacking the TransPort LT Getting Started Personal Inventory Personal InventorySystem Information Address Getting Started Heat, Cold, Humidity, and Glare This page intentionally left blank Operating Environment Getting Started Operating Environment This page intentionally left blank Introducing Your TransPort LT TransPort LT Features TransPort LT FeaturesIntroducing Your TransPort LT Bottom View of Computer Using Your Computer for the First Time Connecting the AC Adapter Turning On the Computer’s Power Turning on the TransPort LT Understanding Post Introducing Your TransPort LT Adjusting the LCD Display Adjusting the LCD DisplayAPM Mode Turning Off Your Computer Introducing Your TransPort LT Tips for Using Your Computer Tips for Using Your ComputerClick Shut Down Traveling with Your Computer Introducing Your TransPort LT Traveling with Your Computer Introducing Your TransPort LT Handling Spills Using the Keyboard Introducing Your TransPort LT Introducing Your TransPort LT Using the Keyboard Using the Embedded Numeric KeypadUsing Special Function Keys Fn Key Function Combination Using the Touchpad Using the Touchpad Reading the System Status Lights Mouse Action How To Describes the meaning of the lights System Status Lights Connecting Peripheral Devices Introducing Your TransPort LT Connecting Peripheral Devices IconConnector Using the Flex-Bay Using the SmartBay Utility To Install a Device in the Flex-BayTo Remove a Device from the Flex- Bay To start the SmartBay utility Using the Floppy DriveIntroducing Your TransPort LT Using the Floppy Drive To insert a device Open the SmartBay Hotswap Utility Inserting a Floppy Disk Using the CD-ROM Drive Using the CD-ROM Drive To play an audio compact disc Introducing Your TransPort LT Using the Hard Drive Using the Hard DriveTo remove the CD Removing the Hard Drive Removing the Hard Drive Charging the Battery Using the BatteryInstalling a Hard Drive Introducing Your TransPort LT Using the Battery Safely Using the Battery Removing the Battery Orientation so that the battery fits in its slot properly Installing the BatteryMonitoring the Battery Charge Introducing Your TransPort LT Using the Battery Doesn’t dee Battery WarningsSet options under Battery Status and Alarm Settings Condition Action to Take Introducing Your TransPort LT Using the Modem Using the ModemPrecautions Before Use Click Control Panel Description of 56K Modem Properties Dialog Box Modem Specifications Data communications Installing the Modem Driver in Windows 95/98 Modem Commands On the server Using AT commandsDepending on the server Basic AT Commands Display the result value ATS0? Resolution and Color Depth Video Features and ConfigurationVideo Features and Configuration Resolution and Color Depth Video Features and Configuration Configuring Display FeaturesSelecting a Monitor Type Changing Color Depth and Resolution Changing the Video Driver Display Properties window appears Display Properties window appears Enter location of the driver files Video Features and Configuration Working with PC Cards Working with PC Cards Using PC Cards Maintaining PC Cards Inserting a PC Card Video Features and Configuration Working with PC Cards This page intentionally left blank AC Adapter Using OptionsUsing Options AC Adapter Auto Adapter Using Options Battery PackBefore You Install Memory Memory Modules Installing a Memory Module Using Options Memory Modules Removing a Memory Module CD-ROM Drive DVD-ROM Drive Module Secondary Battery Using Options Port Replicator Features of the Port ReplicatorPort Replicator Installing a Port Replicator Back view of the port replicator Removing a Port Replicator CRT key may cause malfunction on TV-Out IRQs Drivers and System ResourcesDrivers Drivers and System Resources Service Pack 6A for Windows NT Drivers and System Resources Service Pack 6A for Windows NT Installing the LAN Driver in Windows This page intentionally left blank Using System Setup Starting System Setup Using System SetupStarting System Setup Menu Function Navigation Alternate Function Key Using System Setup Main Menu Main Menu Using System Setup Using System SetupMain Menu Feature Option Description Lower performance Opens the I/O Device Configuration submenu if you Using System Setup Advanced MenuAdvanced Menu IRQ4 , 2F8 IRQ3 default, 3E8 IRQ4 , or 2E8 IRQ3 Enabled , you can set the Base I/O Address field to 3F8IRQ4 default, 2F8 IRQ3 , 3E8 IRQ4 , or 2E8 IRQ3 . When IRQ7 default , 378 IRQ5 , 278 IRQ7 , 278 IRO5 , 3RC Using System Setup Security Menu Security Menu Using System Setup Power Menu Power MenuNormal Maximum PowerSaving Set to Save to RAM, not Save To Disk. The default Disabled Boot MenuUsing System Setup Boot Menu Diskette Using System Setup Exit Menu Exit Menu Creating a Password Using System SecuritySystem Passwords Using System SecuritySystem Passwords Password Deleting a PasswordUsing System Security Locking the Floppy Drive Locking the Keyboard This page intentionally left blank Using Power Management Options Maximum Power Saving Mode Using Power Management OptionsMaximum Power Saving Mode Standby Mode Enabled Suspend Mode Precautions Suspend ModeUsing Power Management Options Suspend Mode Using PowerProfiler Using Power Management Options Using PowerProfiler Using Power Management Options Using PowerProfiler Creating a Save-To-Disk Partition Using PowerProfiler Creating a Save-To-Disk Partition Creating a Save-To-Disk Partition Using PowerProfiler PartitionMagic Drive Image MRestore CD-ROMSoftware Utilities Software Utilities Software Utilities Drive Image Software Utilities Drive Image Professional Drive Image ProfessionalCreating Image Files Drive Image System Requirements 102 103 104 105 106 Advanced Options Disable SmartSector CopyingCheck for File System Errors check box selected Verify Disk Writes Restoring Image Files ImageShieldSplit Image File Into Multiple Files PQtools\userinfo 109 110 111 112 113 Resize Options Skip Bad Sector Check Check for File System ErrorsPartitionMagic Verify Check Writes Partition Map Partition InformationPartition List Completing Tasks Manually PartitionMagic HelpReadMe File Selecting a Hard Disk Selecting a Partition Applying Changes to Your System Changing PartitionMagic Preferences Ignore OS/2 EA Errors on FATSoftware Utilities PartitionMagic Skip Bad Sector Checks Occur because problems might go undetectedClick Ignore OS/2 EA Errors on FAT Set as Read-Only for PartitionMagic Creating Bootable Partitions Creating Partitions To Create a Partition Help 123 Apply Deleting Partitions ScenariosPartition Type Select FAT Changing Partition Labels Basic Concepts in Help Formatting Partitions Converting FAT to FAT32 Converting FAT to Ntfs 129 Drive Copy Hard drive while using the FAT file systemCopying Entire Drives Click Set Active Create Option Phdisk UtilityHelp Screen Software Utilities Phdisk Utility User-specified Memory Size Automatic Memory SizeCalculation Partition or /P Unrecognized Option Fatal ErrorPhdisk Sign-on Message PHDISK/CREATE Failed to Reformat 136 Restoring your Computer To reinstall your Operating SystemRestoring your Computer To reinstall your Operating System Windows Choose Start Windows 98 Setup Operating Problems TroubleshootingTroubleshooting Operating Problems Troubleshooting Infrared Problems Infrared ProblemsPC Card does not work correctly Troubleshooting Modem Problems Modem ProblemsWhen using a PBX phone system I cannot dial on my modem 142 System Specifications SpecificationsSpecifications System Specifications Specifications External AC Adapter Recording the Computer Hardware Configuration IDE Adapter Submenu Ntsc LCD Security Menu Boot Menu Appendix a Regulatory Appendix a Regulatory FCC Notice 150 CTR21 Statement Appendix a Regulatory CTR21 Statement Appendix a Regulatory Power Cord Requirement Turvallisuusluokan 1 Ylittävälle NÄKYMÄTTöMÄLLE General Requirements Country Accredited Applicable Agency Appendix a Regulatory Appendix B Important Safety Instruction 156 Battery Disposal Appendix B Important Safety Instruction Battery Disposal 158 IrDA Appendix C AbbreviationsAppendix C Abbreviations Milliampere PCI PS/2 Appendix D Glossary Appendix D Glossary Disk DMA Direct Memory AccessConventional memory Hard drive Disk cache Resolution MB megabyte Post Power On Self TestRAM Random Access Memory Megabit TFT Thin Film Transistor LCD Zoomed video Index Index Index Cmos complementary metal-oxide semiconductor Suspend 132 Power management features Index VGA