Micron Technology Transport LT warranty Installing the Battery, Monitoring the Battery Charge

Introducing Your TransPort LT Using the Battery

2.Close the LCD panel, and turn the computer over so that the bottom of the unit faces up.

3.Push down the battery latch and hold it, then pull the battery pack from the computer. (Figure 16)

		Figure 16. Removing the Battery Pack
Installing the Battery
	To install the battery pack:
	1.	With the computer’s power off, close the LCD panel and turn the computer
		over so the bottom of the unit faces up.
	2.	Slide the battery pack into the compartment. Make sure the battery is fully
		inserted into the compartment.

		Figure 17. Installing the Battery
CAUTION:
	Insert the battery into the battery compartment, ensuring the correct
	orientation so that the battery fits in its slot properly.
Monitoring the Battery Charge	Battery life is effected by factors such as the power-management settings in
	System Setup, the applications you use, and the brightness settings of the LCD.
	Under normal usage, the battery charge lasts approximately two and a half hours.
NOTE:	Battery life estimates are subject to variation. The actual life of your battery may
	be less than the estimates given in this manual.

43