Micron Technology Transport LT warranty Using System Setup

Using System Setup			Main Menu
	TABLE 10. (Continued) Main Menu
	Feature	Options	Description
	Legacy Diskette	1.44 MB, 3 1/2	Specifies a drive type for floppy drive A. 1.44 MB, 3
	A:	inch	1/2 inch (default) floppy disk can be used.
	Primary Master	Primary Master	Your computer can support two IDE drives. The Main
	and Secondary	Secondary Master	menu contains two IDE adapter fields to configure
	Master:		these drives. Primary Master defines the hard drive
			installed in the computer. Secondary Master defines
			the CD-ROM and DVD-ROM drives or Removable
			drives.
			To configure a replacement or upgrade hard drive,
			move the cursor to select the Primary Master field in
			the System Setup Main menu, and then press the
			[Enter] key. The submenu appears.
			Normally, you can use the Auto option of the Type
			field in the submenu to automatically set the values
			for the other fields in the submenu. Manually set the
			other fields in this submenu only if the drive you have
			installed in your computer is not recognized by
			System Setup.

NOTE: Set the Auto option of the Type field in the Secondary Master submenu to enable the system to boot from Bootable CD-ROMS, you will also need to check the boot device priority field and Bootable CD check field.

After you make your selections from this submenu, press the [Esc] key to exit back to the Main menu.

CAUTION: Before attempting to configure a hard drive, make sure you have the configuration information supplied by the manufacturer of the hard drive. Incorrect drive settings can cause your computer to malfunction.

78