Micron Technology Transport LT warranty Basic AT Commands, Display the result value

Introducing Your TransPort LT Installing the Modem Driver in Windows 95/98

Display the result value

After entering AT commands, the result value is displayed on the screen.

The result value can be displayed during communication. Generally, the result will be OK. According to the ATV command, the result can be displayed as Words or numeral letters. (ATVO: Display as numeral letters, ATV1: Display as English words).

Basic AT Commands	A/	Repeats the previous command in the buffer
	ATA	Responds manually to incoming RING signals
	+++	Switches from on-line mode to command mode
	ATO	Switches from command mode to on-line mode
	ATEn	Echo control
	E0	Disables echoing of the commands to the screen
	E1	Enables echoing of the commands to the screen
	ATDT phone number
		Touch tone dial
	ATDP phone number
		Pulse dial
	ATHn	Hook control
	H0	On-Hook (same as hang-up)
	H1	Off-Hook (same as hold-on)
	ATLn	Modem speaker loudness control
	L0~1	Low volume
	L2	Medium volume
	L3	High volume
	ATMn	Modem speaker control
	M0	Disables modem speaker
	M1	Enables only when in connection procedure

51