Micron Technology Transport LT warranty Using System Setup Exit Menu

Using System Setup Exit Menu

Exit Menu

NOTE: If you want to start the system using a bootable CD, change the ATAPI CD-ROM Drive to be the first priority and make sure the Auto is set in the Type field of the Secondary Master Submenu at Main page, and also make sure that Enabled is set in the Bootable CD check field at Boot page.

Select Exit or press [Esc] from the menu bar to display the Exit menu.

NOTE: Pressing [Esc] does not exit this menu. You must select one of the options from this menu or a menu bar item to exit this menu.

TABLE 18.	Exit Menu
Feature	Option	Description
Exit Saving	Yes	Enables you to exit System Setup and saves your
Changes:	No	changes. When you select this item and press [Enter], a
		message appears asking you if you want to save your
		changes and exit System Setup. Choose Yes and press
		[Enter] to save your changes and exit. Choose No and
		press [Enter] to remain in System Setup.
Exit	Yes	Enables you to exit System Setup without saving your
Discarding	No	changes. When you select this item and press [Enter] a
Changes:		message appears asking you if you want to save changes
		before exiting. Choose No and press [Enter] to exit
		without saving changes. Choose Yes and press [Enter] to
		save changes and exit.
Load Setup	Yes	Loads the default values for all System Setup parameters.
Defaults:	No	When you select this option and press [Enter], a message
		appears asking if you want to load the default
		configuration. Choose Yes and press [Enter] to load
		default settings and remain in System Setup. Choose No
		and press [Enter] to retain your changes and remain in
		System Setup.
Smart Battery		Enables you to discharge the system battery completely
Calibration:		for a more accurate battery level detection. This option
		only works with the smart battery if the AC Adapter is not
		plugged in.

88