Micron Technology Transport LT warranty Using the Touchpad

Introducing Your TransPort LT		Using the Touchpad
	[Fn+F4]	Standby: Puts the computer into standby mode. To resume
		normal operation from standby, press the power button.
	[Fn+F5]	KeyLock: Locks the keyboard and activates password protection.
		Type your password and press [Enter] to unlock the keyboard.
		The [Fn+F5] key combination has no effect unless a password is
		enabled and Password on boot is enabled in System Setup. The
		Num Lock, Caps Lock, and Scroll Lock lights blink when the
		keyboard is locked.
	[[Fn+F10]	Scroll Lock: In some applications, sets the cursor-control keys to
		scroll the page up or down while the cursor position does not
		change. Pressing [Fn+F10] again turns off the scrolling function.
	[Fn+up	Brightness up: Increases the LCD brightness.
	Arrow]
	[Fn+down	Brightness down: Decreases the LCD brightness.
	Arrow]

NOTE: When you press a function key combination, the system sound may be temporarily muted or repeat.

Using the Touchpad

Your computer is equipped with a touchpad, which is an integrated-pointing device that is used to perform standard mouse functions (Figure 8). The touchpad is an advanced and reliable pointing device that works with the touch of your finger.

Touchpad

Mouse buttons

Figure 8. Using the Touchpad

Table 2 explains how to use the touchpad.

NOTE: Press on the touchpad gently. The touchpad responds to light pressure.

28