Using System Setup

Advanced Menu

The I/O Device Configuration submenu contains these fields:

TABLE 14. I/O Device Configuration Submenu

Feature

Option

Description

 

 

 

Serial port:

Enabled

Configures serial port. The options for this field are

 

Disabled

Enabled (default), and Disabled. If you set this field to

 

 

Enabled, you can set the Base I/O Address field to 3F8

 

 

IRQ4 (default), 2F8 IRQ3, 3E8 IRQ4, or 2E8 IRQ3. When

 

 

the field is set to Enabled, the computer’s Operating

 

 

System uses the default configuration or the configuration

 

 

you choose. If you select Disabled, you free up an IRQ for

 

 

use by another device.

Infrared port:

Enabled

Configures the infrared port. The options for this field are

 

Disabled

Enabled, and Disabled (default). If you set this field to

 

 

Enabled, you can set the Base I/O Address field and the

 

 

Mode field. Settings for the Base I/O Address are 3F8

 

 

IRQ4, 2F8 IRQ3 (default), 3E8 IRQ4, or 2E8 IRQ3.

 

 

Mode FIR (fast infrared) enables you to set the DMA

 

 

channel to 3 or 1.When the Infrared port field is set to

 

 

Enabled, the computer’s Operating System uses the

 

 

default configuration or the configuration you choose. If

 

 

you select Disabled, you free up an IRQ for use by

 

 

another device.

Parallel port:

Enabled

Configures the parallel port. The options for this field are

 

Disabled

Enabled (default), and Disabled. If you set this field to

 

 

Enabled, you can set the Mode field and the Base I/O

 

 

Address field. Settings for the Base I/O Address are 378

 

 

IRQ7(default), 378 IRQ5, 278 IRQ7, 278 IRO5, 3RC

 

 

IRQ7, and 3RC IRQ5. Settings for the Mode are Output

 

 

only, Bi-directional,EPP (enhanced parallel port), and

 

 

ECP (extended capabilities port). Selecting the ECP

 

 

setting enables you to set the DMA Channel to 1, 2, or 3.

 

 

When the Parallel port field is set to Enabled, the

 

 

computer’s Operating System uses the default

 

 

configuration or the configuration you choose. If you select

 

 

Disabled, you free up an IRQ for use by another device.

Floppy disk

Enabled

Configures the floppy disk controller. The options for this

controller:

Disabled

field are Enabled (default), and Disabled. When the

 

 

Floppy disk controller field is set to Enabled, the

 

 

computer’s Operating System uses the default

 

 

configuration for the controller.

 

 

 

82

Page 82
Image 82
Micron Technology Transport LT warranty Enabled , you can set the Base I/O Address field to 3F8