Micron Technology Transport LT Using the Modem, Precautions Before Use, Click Control Panel

Introducing Your TransPort LT Using the Modem

Using the Modem

•The battery temperature is below 41° F (5° C) or over 95° F (35° C). If you think the battery temperature is too hot or too cold, turn off the computer, remove the battery, and let the battery reach room temperature. Then try charging the battery again.

•The battery is defective. Replace the battery with a new battery.

All TransPort LT notebooks ship with an internal modem installed. The combination Modem/NIC is optional.

Precautions Before Use

NOTE:

WARNING:

Using the modem on a PBX system (Key-phone system)

The Transport LT Modem with a PCI interface does not support DOS mode. You can use DOS box in Windows 98 instead of pure DOS mode.

If you connect the modem to the digital key-phone line, the modem will be damaged.

If you use a simple terminal program you should type ATX3&W or ATX3 command as an initialization command.

If you use a Windows Communication Program follow the instructions below.

1.Click the Start button and then point to Settings.

2.Click Control Panel.

3.Double-click the Modems icon and the click Properties button at the General tab.

4.Check the Wait for dial tone before dialing check box at the Connection tab.

46