Introducing Your TransPort LT

Tips for Using Your Computer

Tips for Using Your Computer

prompts you to save your files, turns off the computer, and then restarts the computer. A cold boot turns off the computer without saving your files.

To perform a warm (or soft) boot:

1.Click Start on the taskbar.

2.Click Shut Down.

3.Select the Restart option.

4.Click OK or Yes.

5.Save your files if prompted. Your computer will reboot.

NOTE: Do not perform a cold boot unless your keyboard and touchpad have no effect and you cannot perform a warm boot. When you perform a cold boot, you will lose data unless it was saved to a storage medium.

You can also perform a soft boot by saving your files and pressing [Ctrl+Alt+Del]. You can perform a cold (or hard) boot by pressing the power button to turn the computer off, waiting ten seconds, and then pressing the power button to turn the computer on.

The following information will help you avoid potential problems as you use your Transport LT:

CAUTION: Do not try to disassemble your computer. Opening the system chassis voids your warranty. Only an authorized manufacturer service center can replace or add any parts inside the chassis. For more information, contact micronpc.com Technical Support at 1-888-FIX-MYPC (1-888-349-6972).

Follow all the instructions and cautions in your computer user documentation.

The LCD has a polarized surface and can be damaged easily. To prevent damage, avoid touching the screen.

Use only micronpc.com approved AC adapters, auto adapters, memory modules and other options.

Because a notebook computer is small and has restricted air flow around components, it is more likely to overheat than a desktop computer. A fan inside your computer runs when needed to help eliminate some heat. Make

23

Page 23
Image 23
Micron Technology Transport LT warranty Introducing Your TransPort LT Tips for Using Your Computer, Click Shut Down