Micron Technology Transport LT warranty ATS0?

Introducing Your TransPort LT Installing the Modem Driver in Windows 95/98

M2 Enables always

M3 Enables until carrier has been detected after connection

ATS0=nSets S0 register value (n range: 0~255). Sets the number of incoming ring signals before answering. The Modem responds after as many incoming rings as specified in n value. If the value of n is '0', ATA command should be entered for auto answer.

ATS0?	Displays S0 register value on the terminal
ATX3	Dials after waiting for specified time
ATX4	Dials after dial tone is detected
ATZ	Initializes modem
AT&F	Loads the factory default configuration (profile)
AT&V	Shows current configuration
AT&W	Saves user profile

AT&Zn=xStores the dial string in modem memory (n=0~3, x=phone number) e.g.)

AT&Z0=1235678

Automatically calls the stored phone number by using the following command.

ATDTS0	Recalls the stored phone number as AT&Z0 by tone dial
ATDPS0	Recalls the stored phone number as AT&Z0 by pulse dial
AT+MS=X	Sets protocol for modem connection
	(X=V90, V34)
	AT+MS=V90 (default setting)
	Try to connect with V90 (max 56 Kbps)
	AT+MS=V34
	Try to connect with V.34 (max 33.6 Kbps)

52