Micron Technology Transport LT To Remove a Device from the Flex- Bay, Using the SmartBay Utility

Introducing Your TransPort LT Using the Flex-Bay

CAUTION: If your Operating System is Windows 98, you can use the SmartBay Utility to hot-swap the devices. If you do not use Windows 98, make sure that the computer’s power is off before you remove or install any devices.

To Remove a Device from the Flex- Bay

1.Turn the computer’s power off.

2.Close the LCD panel, and turn the computer over so that the bottom of the unit faces up.

3.Pull up on the Flex-Bay latch and pull the device from the bay (Figure 11).

Flex-Bay latch

Figure 11. Removing a Device from the Flex-Bay

4. Remove the device out of the bay.

To Install a Device in the Flex-Bay	1.	Turn the computer off.
	2.	Place the device into the bay.
	3.	Push the device in until it is flush with the chassis.
	4.	Push down on the Flex-Bay latch until the latch snaps into place.
	Your computer’s Operating System automatically recognizes the device in the
	Flex-Bay and configures your computer accordingly.
Using the SmartBay Utility	If your computer shipped with Windows 98, you can use the SmartBay utility to
	hot-swap your devices in the flex-bay. Currently SmartBay is not functional in
	Windows NT and Windows 2000.

34