Micron Technology Transport LT Installing the Modem Driver in Windows 95/98, Modem Commands

Introducing Your TransPort LT Installing the Modem Driver in Windows 95/98

Installing the Modem Driver in Windows 95/98

Modem Commands

What are AT commands?

Before Using AT Commands

You can install the modem drive as shown in the following instructions. Refer to the MRestore CD that comes with your Transport LT for Modem installation instructions for your Operating System.

The Transport LT Modem includes the basic commands used by the Smart Modem of the Hayes Corporation. Additional commands are added to improve its capacity.

AT commands are the control commands of Fax modems developed by the Hayes Corporation. AT commands are the industry standard and are necessary for any fax modem. It is used with S-register to set the modem status.

Generally, AT commands are used by directly entering the command into any communications program, like Hyper terminal.

You can perform the following functions more easily by using AT commands.

•Calling up or hanging up the phone in order to communicate by computer modem.

•Choosing a modem in order to make the most efficient communication status.

Communication programs are becoming more efficient and more intelligent, and users do not need to know all the AT commands. Knowing a few basic commands is enough for computer communications.

To use AT commands, enter them into terminal-based communication programs directly. (Hyper terminal within Windows 98 and Windows NT, and third party communication programs like CrossTalk and Procomm.)

CompuServe and America On-line applications are not terminal-based communication programs, but they are communication programs based on Graphic environment. These programs, and those like them, can initiate the modem setting by entering an AT command in a menu with a modem initialization command.

Before using AT commands you have to know there are two kinds of modes when you use it.

49