Micron Technology Transport LT warranty Maintaining PC Cards, Using PC Cards

Video Features and Configuration Working with PC Cards

video and audio systems without going through the microprocessor. Video conferencing and real-time multimedia devices, such as video cameras, are supported by zoomed video.

NOTE: To use the CardBus and zoomed video technology with Windows NT, install the CardBus and zoomed video drivers provided with your PC Card. If no drivers were supplied with your card, contact the PC Card manufacturer. ATA (AT attachment) and modem PC Cards do not require extra drivers.

Maintaining PC Cards To maintain your PC Cards, follow these guidelines:

•Keep cards away from excessive heat, direct sunlight, and liquids.

•Do not drop, bend, flex, or crush cards when handling.

•Keep dust, magnets, and static electricity away from PC Cards.

•When a card is not in use, carry it in its protective carrying case.

•Some PC Cards include cables that extend from the back of the cards. Be careful not to bend or put excessive strain on these cables.

Using PC Cards You can install PC Cards while the computer is on. To insert a PC Card into a slot:

1.Push the slot door in with the PC Card.

2.Align the card with a slot and insert the card into the slot until it locks in place (Figure 21).

To remove a PC Card:

1.Push the eject button once to pop it outward.

2.Push the eject button again, then the card will be ejected.

59