Phone state before the Direct Page arrives

Phone is idle, and (MUTE) is

OFF

You are on a handset or headset call, and (MUTE) is OFF

You are on a MUTED handset/headset call, OR, you are on a Handsfree call

To answer the Direct Page (indicated by a single burst of tone)

1.Check that (MUTE) is ON solid.

2.Lift the handset or

3.Press (MUTE) to answer in Handsfree mode. (The light turns OFF.)

4.Speak to the paging party.

1.Check that (MUTE) is flashing.

2.Press (MUTE).

The light turns ON solid, and you are now speaking to the paging party and have MUTED your handset/headset call.

3.Speak to the paging party.

4.Press (MUTE) to alternate between handset and handsfree calls.

The party paging you receives a busy tone. Handsfree Answerback does not interrupt your call.

To end a Direct Page call, do one of the following:

Hang up the handset to end a handset call.

Press (SPEAKER) to end a handsfree call.

Press (CANCEL).

Note: When the Handsfree Direct Page call ends, the (MUTE) key light returns to the state it was in before the call was established.

Record a Call

This feature uses your voice mail system to record your phone conversations.

Note: You may be required by law to inform the other party that you are recording the conversation. For specific instructions, consult your system administrator.

To start recording while on a two-party call:

Press the Record Call key.

See Personal Feature Keys on page 31 for instructions on programming a Record Call feature key to your phone.

Note: Your system may be programmed to automatically begin recording external calls when you or the other answers.

54

Page 56
Image 56
Mitel 3300 ICP manual Record a Call, Phone state before the Direct Page arrives