Mitel 3300 ICP manual Direct Paging Handsfree Answerback Disabled

						Using Advanced Features
Phone state before the			To answer the Direct Page
Direct Page arrives
Phone is idle, and		(MUTE) is	1.	Check that		(MUTE) is OFF.
flashing			2.	Listen for the paging party.
			3.	Speak to the paging party.
			4.	Lift the handset if you wish to switch from a Handsfree
				call to a handset call.
You are on a handset or headset			1.	Check that		(MUTE) is flashing.
call, and	(MUTE) is OFF
			2.	Press	(MUTE).
				The light turns ON solid, and you are now speaking to
				the paging party and have muted your handset/headset
				call.
			3.	Speak to the paging party.
			4.	Press	(MUTE) to alternate between handset/headset
				and handsfree calls.
You are on a MUTED			•	The party paging you receives a busy tone. Handsfree
handset/headset call, OR, you are
				Answerback does not interrupt your call.
on a Handsfree call

To end a Handsfree Answerback call, do one of the following:

•Hang up the handset, if you switched to a handset call.

•Press (SPEAKER).

•Press (CANCEL).

Note: When the Handsfree Direct Page call ends, the (MUTE) key light returns to the state it was in before the call was established.

Direct Paging – Handsfree Answerback Disabled

Your administrator enables or disables Handsfree Answerback on your phone. You may also turn Handsfree Answerback off on your phone, even after your administrator has enabled it. To turn Handsfree Answerback off, see Direct Paging – Handsfree Answerback Enabled.

When Handsfree Answerback is disabled or turned off on your phone and you receive a Direct Page, the Direct Page is indicated by a single burst of tone. If your PC headset is plugged in, the Direct Page tone sounds in your headset earphones and you can answer using your headset.

To answer a Direct Page when Handsfree Answerback is disabled, see Table 6.

Table 6: Answering a Direct Page with Handsfree Answerback Disabled

53