Mitsubishi Electronics LT-46231 Installing the Remote Control Batteries, Using the Two IR Sensors

Chapter 3. TV Setup 37

Installing the Remote Control
Batteries
1. Remove the remote control’s back cover by gently	The small remote
pressing in the tab and lifting off the cover.
	control requires two
2. Load the batteries, making sure the polarities (+) and
	AAA alkaline batteries.
(-) are correct. For best results, insert the negative (-)
	2
end first.
	Note: This remote
3. Snap the cover back in place.
	control is provided only
1	with model LT-46231

2

The large remote control requires two AA alkaline batteries.

Care of the Remote Controls

•Use only alkaline batteries.

•Be within 20 feet of the equipment.

•Do not press two or more buttons at the same time unless instructed to do so.

•Do not allow unit to get wet or become heated.

•Avoid dropping on hard surfaces.

•Do not use harsh chemicals to clean. Use only a soft, lightly moistened cloth.

•Do not mix old and new batteries.

•Do not heat, take apart, or throw batteries into fire.

TV Tips

Using the Two IR Sensors

•The IR (infrared) sensor on the bottom left corner of the TV is for the TV’s remote control. Point the TV’s remote at this sensor for best results.

•The IR Learning sensor on the front control panel is used for NetCommand “learning.” Be sure to open the front control panel cover before point- ing the remote control of input device (like a DVD player) at the IR Learning sensor.

See “TV Front Panel, Power Button and Indicators” in chapter 1 for more information.

Turning the TV On or Off

To turn the TV on or off, point the remote control at the front of the TV and press the POWER button. Alternatively, press the POWER button on the front panel of the TV.

Controlling Sound Volume

Changing Channels

To change channels:

•Enter the channel number using the number keys on the remote control and press ENTER. For a two-part digital channel, such as 3-1, press 3 —/CANCEL 1 to enter a dash (separator).

•Press CH / to change channels one channel at a time.

•Press and hold CH / to move quickly through channels.

•Press QV (QuickView) to switch back to the previ- ously tuned channel.

•Use the FAV (Favorites) feature to set up lists of favorite channels and tune to them with the FAV key. See “Channel Menu” in chapter 4.

NOTE: Memorize channels to make finding channels easier. See “Setup Menu” in chapter 5, “TV Menu Settings.”

Press VOL / to adjust the sound level.