Appendices 99

Appendix C: Programming the Remote Control

This appendix explains how to program the TV’s remote control to operate other A/V devices. This is distinct from NetCommand “Learning.” To summarize: the TV’s remote control can be made to operate other devices by two dif- ferent methods:

Remote Control Programming: you must move the slide switch to the position specific to the type of device. Programming is available for the large remote control only.

NetCommand® “Learning”: you can operate other devices with the slide switch in the TV posi- tion. Position IR emitters in front of the other devices and “teach” the devices’ IR signals to the TV. “Learned” functions are sent by the TV and work with both the large and small remote controls.

See chapter 3 for details about NetCommand learning.

Functions Available for Other A/V Devices

The TV’s remote control can be programmed to operate other types and brands of A/V products. To use the remote when programmed, set the slide switch to the position labelled for the product type. The functions performed in each switch position can vary depending on the product. Not all functions work for all models. The most common functions available are listed on this page.

Set the remote control’s slide switch to the type of device you wish to program or control.

VCRs and DVRs

CH /

(RECORD)

POWER

(REVERSE)

SLEEP

(STOP)

(FAST FORWARD)

GUIDE (DVR only)

(PAUSE)

MENU (DVR only)

(PLAY)

0–9Number Buttons

 

 

Mitsubishi VCRs are compatible with some additional buttons.

Cable Boxes and Satellite Receivers

AUDIO (PAGE UP)

0–9Number Buttons (on

CANCEL (on some

 

some models)

 

models)

F1–F4(A, B, C, D keys on

CH /

 

some models)

ENTER (on some

The record/playback keys

 

models)

 

(on some models):

GUIDE (on some models)

LIST

 

 

(FAST FORWARD)

 

 

 

 

 

 

(PAUSE)

POWER

 

 

 

 

(PLAY)

(on some

 

 

 

 

(RECORD)

 

models)

 

 

 

 

 

(REVERSE)

VIDEO (PAGE DOWN

 

 

 

 

 

 

(STOP)

QV (ENTER; for channels

 

 

 

 

 

 

 

on some models)

 

 

 

 

A/V Receivers

 

 

 

 

 

 

 

 

 

 

MUTE

Direct Input Selection

POWER

 

buttons: numbers,

SLEEP

 

FAV and QV (on some

VOLUME

 

Mitsubishi models)

0–9Number Buttons

CD Players

 

 

(not all functions for all models)

 

SLEEP

(REVERSE)

(FAST FORWARD)

(STOP)

(PAUSE)

0–9Number Buttons

(PLAY)

 

 

DVD and Laser Disc Players

(not all functions for all models)

IMPORTANT

Some manufacturers may change their products or they may use more than one remote control system. The TV’s remote control may be unable to operate your A/V equipment in these cases.

CANCEL (on some models)

CH / (for track skip on some models)

ENTER

MENU

POWER

SLEEP

(on some models)

(FAST FORWARD)

(PAUSE)

(PLAY)

(RECORD)

(REVERSE)

(STOP)

0-9Number Buttons (on some models)

Page 99
Image 99
Mitsubishi Electronics LT-46231 manual Appendix C Programming the Remote Control, Functions Available for Other A/V Devices