110 Appendices
Reset Name When to Use How to Use Resulting Action
Parental Lock
Pass Code
To change your Parental
Lock Pass Code
T
his information is listed on the cutout page in
Appendix A. Please refer to that page.
Allows a new code to be
established.
Front-Panel Lock
Release
To re-enable the front-
panel controls after
activation of the Front-
Panel Lock
• When Energy Mode is set to Fast
Power On, press and hold the
MENU
button on the front panel for over eight
seconds.
• When Energy Mode is set to Low
Power, press
POWER
on the front panel to
turn on the TV. Press and hold the
MENU
button on the front panel for over eight
seconds.
Allows the front panel to be
unlocked if the remote control is
misplaced.
System Reset If the TV does not turn on
or off, does not respond
to the remote control or
front panel buttons, or
has audio but no video.
Press the
SYSTEM RESET
button on the front
panel with a pointed object such as the
point of pencil or end tip of a paperclip.
The TV will turn off and the blue LED
will flash quickly for about one minute.
When the blue LED stops flashing,
you may turn on the TV. The changes
you made most recently, before using
SYSTEM RESET
, may be lost. Changes
you made previously, however, are
not lost.
TV Reset
IMPORTANT:
Use this reset
only if all other
resets have been
unsuccessful.
To reset all consumer-
accessible settings
and all memories to the
original factory defaults.
CAUTION: All owner-
performed setups and
adjustments will be
erased.
1. While viewing the TV, press
MENU
to
display the TV Main menu.
2. With the Main menu displayed, press
number keys 1 2 3 to display the
Reset Menu.
3. READ THE ON SCREEN WARNING
AND INSTRUCTIONS.
• If you do not wish to use this reset,
press
EXIT
or
MENU
to back out.
• If you do wish to use the reset,
press
ENTER
to erase all memories
and settings.
The TV will start the initializa tion
process. The TV will then turn of f
and the front blue LED will start
flashing. When the LED stops
flashing, you can turn the TV on
again. The Parental Lock Pass
code will remain unaffected, but
all other memories and settings
outlined in this Owner’s Guide will
need to be set again.
Appendix D: Troubleshooting, continued
Service and SupportService