Mitsubishi Electronics LT-46231, LT-37132 113, Indicators Symptom Remarks, Sound Symptom Remarks

Appendices 113

Appendix D: Troubleshooting, continued

Picture

		Symptom	Remarks
	9.	Screen is black when trying to view digital	The PerfectColor™ color balance has been incorrectly set. Press
		channels or IEEE 1394 device.	VIDEO repeatedly until you see the PerfectColor option and press
			ENTER to open the PerfectColor ™ menu.
10.		DVCR analog/digital problems.	If the tape is currently playing but no picture displays, there
			may be a mismatch of the media with the display. Press INPUT
			to display the Input Selection menu. Press ENTER for the DVCR
			device. If digital is selected, try analog, or if analog is selected, try
			digital.
11.		Cannot see a picture from a DV Camcorder.	Use analog connections for video and audio. You can still use the
			IEEE 1394 connection for control functions, however.
	Indicators
		Symptom	Remarks
		Status indicator light is a steady/flashing red.	Service may be required. Turn off the TV and unplug the set
			from the AC power source. Wait one minute and then plug the set
			back in.
			If the LED is still on, contact your dealer or a Mitsubishi Autho-
			rized Service Center. See www.mitsubishi-tv.com or call
			1-800-332-2119 to receive Authorized Service Center information.
	Sound
		Symptom	Remarks
	1.	There is no sound even when the volume is	• Check if the MUTE button is on.
		turned up.	• The TV’s “Listen to:” setting may be set to SAP.
			• Check that the TV Speakers setting is On in the Audio/Video
			menu.
			• If using an A/V receiver, check audio source in Input Selection
			menu.
			• Perform a System Reset.
	2.	The sound does not match the screen	• The TV’s Listen to: setting may be set to SAP.
		picture.	• If using stereo or A/V receiver speakers, check their input
			selection.
			• If using stereo or A/V receiver, check that AUDIO OUTPUT
			LEFT/RIGHT or DIGITAL AUDIO OUTPUT on TV’s back panel
			is connected to the A/V receiver.