62Chapter 5. TV Menu Settings
Setup Menu
See chapter 3, “TV Setup,” for use of the Setup menu.
NetCommand Menu
The features described in this section are available even if you have not performed NetCommand setup. See chapter 3, “TV Setup,” for options available for
Review TV Connections
(no NetCommand setup required)
Press 
to highlight Review and press ENTER to display the Review screen (see figure 2).
To turn a connected input On or Off, highlight the check box for the input and press ENTER. This either adds or removes a check mark. A check mark adds/removes an icon from the Input Selection menu. Inputs shown in gray indicate that these inputs do not have a device connected, and can not be turned On or Off.
Figure 2. The Review screen lists all TV connections. IEEE 1394 inputs are listed separately on the right.
Input Name Menu
(no NetCommand setup required)
Use the Input Name menu to assign useful labels to the TV inputs that appear in the Input Selection menu. See figures 3 and 4. The current viewing device and any unused inputs appear grayed out and unselectable in the Input Name menu.
|
|
|
|
|
|
|
|
|
|
|
|
| Icon for the Icon |
| Order menu | ||
Icon for the Input Name menu |
| |||||||
Figure 3. The Input Name menu and Icon Order menu are accessible through the NetCommand menu.
Figure 4. Input Name menu
To rename an input
1.If you are currently watching the input you wish to rename, first change to another input. To do so, press INPUT to open the Input Selection menu, highlight a dif- ferent input, and press ENTER.
2. With the Input Name menu displayed, press to move the highlight to the box for the input you wish to rename.
3. Press 
to select from the following list.
Cable Box | Game |
Camcorder | HD Disc |
DVD | Satellite |
DVD2 | VCR |
DVR (digital video |
|
recorder, recordable DVD) |
|
Only one VCR label is available, so If you have a second VCR connected, leave the name as the default name.
To Replace One Device with Another on an Input Jack
1.Disconnect the device you wish to remove from the TV.
2.Connect the new device to the vacated jack.
3.Open the Input Name menu from the NetCommand menu.
