First Functional Test

Minimum Connections for the Functional Check

 

 

3 First Functional Test

 

 

 

 

 

 

The wiring diagram below (Fig. 3-1) shows the minimum connections that you must make to test

 

 

 

 

 

 

an MR-J3-T series amplifier with the MR Configurator setup software. In test mode you can

 

 

 

 

 

 

check whether all the components are working properly.

 

 

 

 

 

 

 

 

 

NOTE

 

 

 

You can also use the optional MR-PRU-03 HMI control terminal for performing initial tests

 

 

 

 

 

 

 

 

 

 

and setting the amplifier’s parameters. For further details see the MR-J3-T series instruction

 

 

 

 

 

 

manual.

3.1Minimum Connections for the Functional Check

 

Servo motor

1-phase

 

200–230V AC

Motor

 

Fig. 3-1:Wiring diagram for minimum configuration without control terminals

MR-J3-T

3 - 5