Positioning with Digital Inputs

Functional Test of Digital Input Positioning

 

 

MR Configurator can monitor all the inputs and outputs of the MR-J3-T, including those on the MR-J3-D01 I/O extension.

Procedure:

￿Connect the PC/notebook to the USB port (CN5) of the servo amplifier using cable MR-J3USBCBL3M.

￿Start MR Configurator and make the following selections:

–Select the MR-J3-T series amplifier.

–Select the MR-J3-D01 expansion card (“option unit”).

￿

￿

Fig. 4-20:Settings in MR Configurator for checking the MR-J3-T with the MR-J3-D01 expansion card

After this you can monitor the signals of the expansion card with the option Option unit I/F display in the Monitor menu.

Fig. 4-21:Selection of the “Option unit I/F display” terminal monitor option

MR-J3-T

4 - 29