First Functional Test

Functional Test Settings

 

 

3.2Functional Test Settings

The following input signals are required to activate the servo amplifier’s motor output:

￿EMG -> Force stop (safety signal)

￿SON -> Servo ON

￿LSP -> Forward rotation stroke end (limit switch)

￿LSN -> Reverse rotation stroke end (limit switch)

You can configure the servo amplifier to activate these signals automatically when the power is switched on:

Procedure:

￿Connect the PC / notebook to the servo amplifier’s USB port (CN5) with the MR-J3USBCBL3M cable.

￿Start MR Configurator on the computer and make the following settings:

– Select the MR-J3-T series servo amplifier:

￿

￿

￿

Fig. 3-3:Selecting the servo amplifier

MR-J3-T

3 - 7