Multi-Tech Systems FR111 owner manual

length, parity, stop bits, and flow control. The Async Data Port Configu- ration dialog box displays the default parameters that may apply to a majority async devices.

When the data device is defined, then the trunk configuration needs to be defined. The trunk configuration is displayed in the Trunk Configura- tion dialog box. Most of the trunk information is supplied by your network service provider.

For example, if the MultiFRAD at remote site 2 in our typical Frame Relay network in Figure 1-2 is being configured, the DLCI is 26, the Access Rate is 56000, and generally a Committed Info Rate of 32000 with a Excess Burst Rate (Be) of 24000 would allow the multiplexer at remote site 2 to communicate with the host site. These parameters can be added to the Trunk Configuration dialog box with a Management Type defined by your network service provider, lets say for this example that it is LMI. The default Management Parameters in the Trunk Configu- ration dialog box for the most part should work for this typical applica-

14