Multi-Tech Systems FR111 owner manual Switch Settings, DIP-Switches

2.4Switch Settings

The 8-position DIP switch located on the right side of the MultiFRAD only uses the first four positions. The DIP switches are shown in Figure 2-3 and their settings are described in Table 2-1.

DIP-Switches

	Figure 2-3. Switch Settings
	Table 2-1. Switch Settings
Switch	Mode	Position	Description
1	Cmd/Data	UP*	Data
		DOWN	Command
2	Clocking	UP*	DDS
		DOWN	Internal
3	Loopback	UP*	Normal
		DOWN	Loopback
4	DSU	UP	FRAD
		DOWN*	DSU
5-8	Not Used

*Factory default setting

26