Multi-Tech Systems FR2201 manual Shunts

MultiFRAD II User Guide

Shunts

There are three shunts (Figure 1-3) on the printed circuit board for the trunk and the data channels.

Trunk RS232

Shunt Position

Trunk V.35

Shunt Position

Channel 1 V.35

Shunt Position

Channel 2 V.35

Shunt Position

Figure 1-3. Shunts

The MultiFRAD has separate shunts for the trunk and both data channels. Both the default RS232 Shunt Position and the V.35 position for the Trunk are identified. The V.35 positions for the Channel shunts are also shown. To change the position of a shunt, refer to the V.35 Shunt procedure in Chapter 2.

10