49
Chapter 5 - Remote Configuration and Management
remote MultiFRAD.
If your Modem Initialization String, Initialization Response, or Connect Response values are
different than the defaults in the dialog box, refer to your modem user documentation and change
the default values to match your modem.
Click OK when you are satisfied with all your selections.
6 You are returned to the Windows program. Start the MultiFRAD Configuration program.
Windows 3.1x
: Double-click the MultiFRAD Configuration icon in the Program Manager.
Windows 95/NT: Click Start | Programs | MultiFRAD 2000 | MultiFRAD Configuration.
7 The Dialing Router Dialog Box is displayed while software is dialing the remote MultiFRAD.
8 The Reading Setup Dialog Box is displayed.
9 The MultiFRAD Setup dialog box is displayed. This is the dialog box of the remote MultiFRAD.
Refer to Chapter 4 for a description of each dialog box. For a detailed description of each field
within a dialog box, refer to the on-line helps provided within your MultiFRAD software.
10 After you have changed the configuration of the remote MultiFRAD, click the Download Setup
button to update the configuration. The remote MultiFRAD will be brought down, the new
configuration written to the unit, and the unit will reboot.
11 Click the Exit button when the downloading is complete.
12 The Hangup connection with Router? dialog box is displayed.
Click Yes to disconnect the phone connection to the remote site.
13 If the same telephone number is not going to be used again in the immediate future, you may
want to remove it from the Port Setup dialog box.
14 At the remote site, reconnect the MultiFRAD to the serial port of the PC and from the Program
Manager screen click the MultiFRAD Configuration Icon to verify that the MultiFRAD is running.