MultiFRAD II User Guide
Index |
|
A |
|
About CompuServe | 60 |
About the Internet | 60 |
About the | 60 |
ASCII String | 19 |
Attachment Unit Interface | 9 |
B |
|
Back Panel |
|
Connectors |
|
Channels 1 and 2 | 9 |
Command Port | 9 |
EtherNet | 9 |
EtherNet AUI | 9 |
Power | 9 |
Back Panel Description | 9 |
BBS | 59 |
C |
|
Cable Connections | 15 |
Cabling Diagrams | 62 |
Cabling Procedure | 15 |
Channel 1 Connector | 9 |
Channel 2 Connector | 9 |
Command Port Connector | 9 |
Committed Information Rate | 24 |
CompuServe | 60 |
Configuration Port Setup | 27 |
Connectors |
|
Channels 1 and 2 | 9 |
Command Port | 9 |
EtherNet | 9 |
EtherNet AUI | 9 |
Power | 9 |
Contacting Tech Support via | 57 |
D |
|
Data Communications Equipment | 6 |
Data Port Configuration | 46 |
Data Port Statistics | 39 |
Data Terminal Equipment | 6 |
Default Setup | 27 |
Download Default Setup | 27 |
Download Firmware | 26 |
E |
|
Ethernet | 19 |
EtherNet | 9 |
EtherNet AUI Connector | 9 |
EthernetII (Type II) | 20 |
Excess Burst Rate | 24 |
F |
|
60 | |
Firmware | 26 |
Frame Relay Access Device | 6 |
Frame Relay Statistics | 38 |
Frame Types | 20 |
EthernetII (Type II) | 20 |
LLC (802.2) | 20 |
Raw (802.3) | 20 |
SNAP | 20 |
Front Panel |
|
Description | 8 |
LEDs | |
G |
|
Glossary | 71 |
I |
|
Indicators |
|
Channels |
|
Clear To Send (CTS) | 8 |
Data Terminal Ready (DTR) | 8 |
Receive (RCV) | 8 |
Request to Send (RTS) | 8 |
Transmit (XMT) | 8 |
V35 (V35) | 8 |
Ethernet |
|
Collision (COL) | 8 |
Link (LNK) | 8 |
Receive (RCV) | 8 |
Transmit (XMT) | 8 |
Fail | 8 |
Power | 8 |
Trunk |
|
Carrier Detect (CD) | 8 |
Clear To Send (CTS) | 8 |
Receive (RCV) | 8 |
Request to Send (RTS) | 8 |
Transmit (XMT) | 8 |
V35 (V35) | 8 |
Internet | 60 |
Internet Protocol (IP) | 68 |
IP Addressing | 69 |
IP Setup | 29 |
IP Statistics | 35 |
IPX Port Statistics | 36 |
IPX Routing Enable | 19 |
L |
|
Limited Warranty | 56 |
56 | |
LLC (802.2) | 20 |
84
