Multitech RF820 Dhcp Server Wlan Subnet Settings and Wlan Fixed Addresses, Add Fixed Address

Models: RF820 RF830-AP RF830 RF820-AP

1 94
Download 94 pages 4.97 Kb
Page 71
Image 71

Chapter 5 – Configuration Using Web Management Software

DHCP Server > LAN Fixed Addresses

DHCP Server > WLAN Subnet Settings

DHCP Server > WLAN Fixed Addresses

The DHCP server can be made to assign a fixed IP address for a particular system by identifying the MAC address. This binding can be made permanent by configuring it here. The same IP address will not be used for any DHCP client with a different MAC address, even if there is no active DHCP connection with that IP address.

Add Fixed Address

Enter both a MAC address and an IP address.

MAC Address

Enter the MAC address.

Add Fixed Address

Enter the fixed IP address.

DHCP Server > WLAN Subnet Settings and WLAN Fixed Addresses

This screen becomes available after you have checked the Independent Subnet box on the Network Setup > Wireless LAN screen. On this DHCP screen, you will be able to set up a separate Network subnet address for the wireless LAN. You might want to use this to give a certain workstation access to the Internet and not to the your local network or vice versa.

Following the same directions for these screens as for the LAN Subnet Settings and LAN Fixed Addresses.

Multi-Tech Systems, Inc. RouteFinder SOHO RF820/RF820-AP & RF830/RF830-AP User Guide (S000399E)

71

Page 71
Image 71
Multitech RF820-AP, RF830-AP manual Dhcp Server Wlan Subnet Settings and Wlan Fixed Addresses, Add Fixed Address