Multitech RF820-AP, RF830-AP manual Screen Notes, Wizard Setup

Chapter 4 – Configuring the RouteFinder

Wizard Setup

RF820/RF820-AP and RF830/RF830-AP Wizard Setup

Click the Wizard Setup button located under the Menu Bar. The following screen displays.

Use the same directions for the RF820/RF820-AP and RF830/RF830-AP.

Screen Notes:

•PPP Client for Cellular/Analog Modem Backup is available on the RF820/RF820-AP only.

•The RF830/RF830-AP has two WAN ports; the RF820/RF820-AP only one. A WAN 2 section displays on the RF830/RF830-AP Wizard Setup screen for configuring this second port.

•If you are using the AP build, a section labeled WLAN (inset shown on the right of the screen shot) displays after you select Independent Subnet on the Network Setup > Wireless LAN screen.

LAN

IP Address – 192.168.2.1 defaults into this field.

Subnet Mask – 255.255.255.0 defaults into this field. These should be acceptable for your site.

Multi-Tech Systems, Inc. RouteFinder SOHO RF820/RF820-AP & RF830/RF830-AP User Guide (S000399E) 21