![](/images/new-backgrounds/1187597/18759715x1.webp)
Chapter 1 – Introduction and Description
Back Panels
RF820
RF820-AP
RF830
RF830-AP
Connector
Antenna Connector
WAN
LAN Ports
Reset
Serial
12VDC Power
Description
Connector for the 2.4 GHz 5dBi
Note: The antenna must be attached in order for the RouteFinder to be operational.
The WAN (10/100BaseT) port connects the DSL modem or cable modem.
The RF820 and
There are 4 LAN ports. You can connect to PCs, FTP servers, printers, or other devices you want to put on your network.
The Reset button resets the RouteFinder to its factory defaults. Press and hold the Reset button until the Status LED blinks, and then release it. Do not press this button unless you want to restore all settings to the factory defaults.
(RF820 and
8 |