Muratec M840, M880, M860 manual Clearing Memory, Using EasyStart to Enter Initial Settings

Change

character choice

Change

character choice

Getting Started

EasyStart

Your Muratec fax machine comes with EasyStart ---- a quick introductory program

which makes it easy for you to enter the basic information necessary to get started right away.

Important: You can always change any of these settings later, as you familiarize yourself with your fax machine and your fax communications needs. Also, be sure you have correctly plugged in your machine (see page 1.11) before proceeding.

Clearing Memory

Enter the name you want to appear at the top of your faxes. Make sure it doesn’t exceed 25 characters. (As you enter your TTI, you will only see the six most recent characters you entered.)

You can choose among uppercase letters, lowercase letters, numerals and symbols. Use the numeric keypad, as shown,

to select character choices and enter characters. (For spaces, use the leftmost character in each line of choices.)

Before you use EasyStart to enter information into your fax machine, it’s best to clear its memory. The fax machine’s user settings, protected by a long-life battery backup, store information such as your fax number and the date and time. Clearing the memory ensures that only your information is stored.

To clear the fax machine’s memory, press program, , 2, mode/enter.

Note: If you make a mistake, press contrast/cancel to erase, leftward. Then re-enter until the name is as you wish.

When done, press mode/enter.

Scroll	Enter	Scroll
within set		within set

Using EasyStart to Enter Initial Settings

Important: Be sure your fax machine has paper before proceeding with EasyStart, since this procedure will print a settings list at the end.

1.Press program, 7, mode/enter, 1, 4.

User Install

2. Press mode/enter to select the displayed setting.

′97 07 14 00:00

3.Enter the date and time (in 24-hour format) using the numeric keypad, “typing over” the numerals displayed. If you want to change just one numeral in the date or time, press one-touch key a to move leftward in the line or one-touch key b to move rightward.

To save the change, press mode/enter.

Set Your TTI?

4. Press mode/enter to enter a TTI.

_ABCDEF >

Set Fax #?

5. Press mode/enter to enter a fax number.

_

Use the numeric keypad to enter your fax number, up to 20 digits in length. (To put in a dash for easier reading, as shown here, press hold once.)

Note: If you make a mistake, just press contrast/cancel to erase, leftward. Then re-enter until the fax number is just as you want it.

To save the number, press mode/enter.

Tel Type: Tone

6.Press program to select your fax machine’s dialer as required by your telephone system.

7.To save the change, press mode/enter. Your fax machine will now print a list of its settings

1.14