Muratec M860, M840 How to Insert a Document, Sending a Fax with On-Hook Dialing or a, Handset

Getting Started

How to Insert A Document		Note: If the remote fax is busy, your fax will automatically attempt the call
		again. See “Redialing”, next page.
Your document feeder will hold up to 10 sheets of normal-weight copier paper.
To insert a document into the fax machine:
		Sending A Fax with On-Hook Dialing or A
1. For multi-page documents, fan the pages leading
		Handset
edges of the pages in your document. Each page of
the stack should extend slightly farther than the page		1. Insert the document. Adjust the contrast and resolution if necessary.
on top of it.
			Fax Norm Norm
2. Adjust the document guides so that
		To adjust the resolution and contrast:
they slide along the sides of your		• Press mode/enter to change resolution.
document.		• Press contrast/cancel to change contrast.
		2. Pick up the handset or press monitor/call and listen for a dial tone.
3. Insert the document face down into		3. Enter the fax number using a one-touch key, speed-dial number, or the
the feeder.
		numeric keypad.
		Note: For information on entering one-touch and speed-dial numbers, see
		pages 2.5-2.7.
			123-4567
Sending
		4. When you hear fax tones from the remote unit, press start.
Here’s how to fax a document.		Note: If a person answers the phone, tell him or her you’re trying to send a
1. Insert the document. Adjust the contrast and resolution if necessary.		fax. When his/her fax machine sends you fax tones, press start.
		5. If you’re using the handset, hang up after pressing start.
	Fax Norm Norm
		If you’re using the monitor, your fax machine will do the rest.
To adjust the resolution and contrast:
		Note: If the remote fax is busy, see “Redialing”, next page.

•Press mode/enter to change resolution.

•Press contrast/cancel to change contrast.

2.Enter the fax number using a one-touch key, speed-dial number, or the numeric keypad.

Note: For information on entering one-touch and speed-dial numbers, see pages 2.5-2.7.

123-4567

As you can see, you enter any access codes along with the number. If you need not dial any codes, enter only the remote fax number.

3.Press start. (If you use a one-touch key, there’s no need to press start.) Your fax machine simply dials the other fax. When it makes contact, your machine feeds the document through, scanning and transmitting it as it goes.

123-4567

1.16