Muratec M840, M880, M860 manual Making Copies, Searching and dialing through a Caller ID from memory

Getting Started

Searching and dialing through a Caller ID from memory.

1.Press speed dial twice. The LCD shows the latest Caller ID.

2.To scroll through the Caller ID in the memory, press speed dial.

Note: If you press 2, 4, 6 or 8 on the numeric keypad, the LCD will change to the EasyDial directory. (For more information of EasyDial directory, see page 2.8.)

3.When the LCD is showing the Caller ID you want to dial, press start.

•If there is a document in the feeder, your machine will dial a fax call to the selected Autodialer number.

•If there isn’t a document in the feeder, your machine will activate the monitor speaker and dial a regular phone call. At this point, you may either.

---Lift the handset now or

---Listen to the monitor speaker until you hear the other person answer, and then lift the handset.

Printing the Caller ID List

You can print a listing of the Caller IDs for the last 10 calls received.

The list includes the caller’s name (only when available) and phone number. To print the Caller ID list:

Press program, 6, mode/enter, contrast/cancel, mode/enter.

Making Copies

Your fax machine serves as a handy copier for your insurance forms, receipts and letters.

To make copies:

1. Adjust the document guides to fit the pages you’re copying. Your document feeder will accommodate up to 10 pages. For multi-page documents, fan the pages slightly (see right). The first page of the fax should extend just slightly from the rest.

2. Insert the document face down (see right). The fax machine will “grab” the first page of the document and position it for copying.

3.Press copy. The copy will feed out through the lower recording paper exit at the front of the machine, and your original will exit through the original document exit at the front.

1.23