Multi Purpose Tray

1.Open the multi purpose tray.

2.Fold out the paper supports (1).

3.Press gently down on the paper platform (2) to ensure it is latched down.

4.Load the paper and adjust the paper guides (3) to the size of paper being used.

4

3

1

2

3

•For single-sided printing on letterhead paper load the paper into the multi purpose tray with pre-printed side up and top edge into the unit.

•For two-sided (duplex) printing on letterhead paper, load the paper with pre-printed side down and the top edge away from the unit.

•Envelopes should be loaded face up with top edge to the left and short edge into the unit. Do not select duplex printing on envelopes.

•Do not exceed the paper capacity of about 100 sheets or 10 envelopes. Maximum stacking depth is ablut 3/8” (10 mm).

5.Press the tray latch button (4) inwards to release the paper platform, so that the paper is lifted and gripped in place.

6.Set the correct paper size for the multi purpose tray in the Paper Setup menu. See “Paper Setup” on page 32.

Getting started > 22