FEATURE

OPTION

 

 

DESCRIPTION

 

 

 

 

 

Print Setup

EPSON FX

Form Length

11.7 Inch, 11 Inch,

Specifies the length of paper.

(cont.)

Setup

 

12 Inch

 

 

(cont.)

 

 

 

 

TOF Position

0.0 Inch - 1.0 Inch

Specifies the distance of print from

 

 

 

 

 

 

the top edge of the paper.

 

 

 

 

 

 

 

Left Margin

0.0 Inch - 1.0 Inch

Specifies the distance of print from

 

 

 

 

the left hand edge of the paper.

 

 

 

 

 

 

 

Fit to Letter

Enable, Disable

Sets the printing mode that can fit

 

 

 

 

print data, equivalent to 11 inches

 

 

 

 

(66 lines), in the LETTER-size

 

 

 

 

printable area.

 

 

 

 

 

 

 

Text Height

Same, Diff

Sets the height of a character.

 

 

 

 

SAME: Regardless of CPI, same

 

 

 

 

height

 

 

 

 

DIFF: As CPI, character heights

 

 

 

 

vary.

 

 

 

 

 

 

 

Cont Paper

OFF, ON

If you have multiple feed trays

 

 

Mode

 

installed in which the media is the

 

 

 

 

same size and type you can enable

 

 

 

 

continuous paper mode. When one

 

 

 

 

tray runs out of paper, the unit will

 

 

 

 

switch to another tray.

 

 

 

 

 

Network

Network

TCP/IP

Disable, Enable

Enables or disables this network

Menu

Setup

 

 

protocol.

 

 

 

 

 

 

 

IP Version

IPv4, IPv4 + IPv6

Set up the IP version.

 

 

 

 

Display condition: TCP/IP protocol

 

 

 

 

must be enabled.

 

 

 

 

 

 

 

NetBEUI

Disable, Enable

Enables or disables this network

 

 

 

 

protocol.

 

 

 

 

 

 

 

NetBIOS over

Disable, Enable

Enables or disables this network

 

 

TCP

 

protocol.

 

 

 

 

Display condition: TCP/IP protocol

 

 

 

 

must be enabled.

 

 

 

 

 

 

 

NetWare

Disable, Enable

Enables or disables this network

 

 

 

 

protocol.

 

 

 

 

 

 

 

EtherTalk

Disable, Enable

Enables or disables this network

 

 

 

 

protocol.

 

 

 

 

 

 

 

Frame Type

Auto, 802.2, 802.3,

Selects the Ethernet MAC layer

 

 

 

ETHERNET II, SNAP

frame type.

 

 

 

 

Display condition: Netware must

 

 

 

 

be enabled.

 

 

 

 

 

 

 

IP Address Set

Manual, Auto

Specifies whether IP address

 

 

 

 

allocation is automatic (DHCP) or

 

 

 

 

manually assigned.

 

 

 

 

Display condition: TCP/IP protocol

 

 

 

 

must be enabled.

 

 

 

 

 

 

 

IPv4 address

xxx.xxx.xxx.xxx

Current assigned IP address.

 

 

 

 

To change, enter the address

 

 

 

 

using the numerical keypad. Press

 

 

 

 

Enter to register new address.

 

 

 

 

Display condition: TCP/IP protocol

 

 

 

 

must be enabled.

 

 

 

 

 

Configuring Your Machine > 54