FEATURE

OPTION

 

 

DESCRIPTION

 

 

 

 

 

Print Setup

Color Menu

UCR

Low, Medium, High

Selects the limitation of the toner

(cont.)

(cont.)

 

 

layer thickness.

 

 

 

 

If paper curl occurs in dark

 

 

 

 

printing, selecting Medium or Low

 

 

 

 

sometimes helps reduce curl.

 

 

 

 

 

 

 

CMY100%

Disable, Enable

When enabled, black areas are

 

 

Density

 

produced using 100% C, M, and Y

 

 

 

 

instead of black. This results in a

 

 

 

 

glossier finish.

 

 

 

 

 

 

 

CMYK

OFF, ON

Setting to OFF will simplify the

 

 

Conversion

 

conversion process of CMYK data,

 

 

 

 

which will reduce process time.

 

 

 

 

This setting is ignored when Ink

 

 

 

 

Simulation function is used.

 

 

 

 

 

 

Sys Config

Personality

Auto Emulation,

This item selects which industry

 

Menu

 

PCL, IBM PPR, EPSON

standard emulation your unit

 

 

 

FX, PS3 Emulation

should use. When set to Auto,

 

 

 

 

incoming data is examined and the

 

 

 

 

correct emulation is automatically

 

 

 

 

selected each time a print job is

 

 

 

 

received.

 

 

 

 

 

 

 

Alarm release

Manual, Auto

When Manual, non-critical

 

 

 

 

warnings, such as requests for a

 

 

 

 

different paper size, can be

 

 

 

 

cleared by pressing the RESET

 

 

 

 

button. When set to Auto, they are

 

 

 

 

cleared when the print job

 

 

 

 

resumes.

 

 

 

 

 

 

 

Auto Continue

OFF, ON

Determines whether or not the

 

 

 

 

unit will automatically recover

 

 

 

 

from a memory overflow

 

 

 

 

condition.

 

 

 

 

 

 

 

Error Report

OFF, ON

If ON, the unit will print error

 

 

 

 

details when a PostScript

 

 

 

 

emulation error occurs.

 

 

 

 

 

 

PCL Setup

Font Source

Resident

Specifies the location of the PCL

 

 

 

 

default font. Normally this will be

 

 

 

 

internal unless additional fonts are

 

 

 

 

installed in the expansion POM slot

 

 

 

 

or additional fonts have been

 

 

 

 

downloaded to RAM as permanent

 

 

 

 

fonts.

 

 

 

 

 

 

 

Font No.

100~90

Sets the PCL font number.

 

 

 

 

 

 

 

Font Pitch

0.44~10.00~99.99

Sets the width of the PCL default

 

 

 

CPI

font.

 

 

 

 

 

 

 

Font Height

4.00~12.00~999.75

Sets the height of the PCL default

 

 

 

Point

font.

 

 

 

 

 

 

 

Symbol Set

PC-8

PCL symbol set. If the font source

 

 

 

 

and number are changed to one

 

 

 

 

which does not support the

 

 

 

 

selected symbol set, this must be

 

 

 

 

changed to an available symbol

 

 

 

 

set for that font.

 

 

 

 

 

Configuring Your Machine > 51