FEATURE

OPTION

 

 

DESCRIPTION

 

 

 

 

 

Print Setup

Print Menu

Print Setup

Width:

Selects the width of the paper

(cont.)

(cont.)

(cont.)

2.5~8.5~11.7 inches

defined by the “Custom” settings.

 

 

 

 

 

 

 

 

Length:

Selects the length of the paper

 

 

 

4.1~11~47.2 inches

defined by the “Custom” settings.

 

 

 

 

Note that media of up to 1200 mm

 

 

 

 

in length can be fed from the multi

 

 

 

 

purpose tray for banner printing.

 

 

 

 

 

 

 

Printer Adjust

Manual Timeout:

Specifies how many seconds the

 

 

 

Disable, 30 seconds,

machine will wait for paper to be

 

 

 

60 seconds

fed before cancelling the job.

 

 

 

 

 

 

 

 

Wait Timeout:

Specifies how many seconds the

 

 

 

Disable, 5, 10, 20,

machine will wait when received

 

 

 

30, 40 seconds, 50,

data pauses before forcing a page

 

 

 

60, 90, 120, 150,

eject. In PostScript Emulation

 

 

 

180, 210, 240, 270,

mode the job will be cancelled if

 

 

 

300 seconds

timeout occurs.

 

 

 

 

 

 

 

 

Low Toner:

Specifies whether the machine

 

 

 

Stop, Continue

should continue printing even after

 

 

 

 

a low toner condition is detected.

 

 

 

 

 

 

 

 

Jam Recovery:

Specifies whether the machine

 

 

 

Disable, Enable

should perform jam recovery after

 

 

 

 

a paper jam occurred. If enabled,

 

 

 

 

the unit will attempt to re-print

 

 

 

 

any pages lost due to a paper jam

 

 

 

 

once the jam has been cleared.

 

 

 

 

 

 

 

 

Paper Black Setting:

Used for micro adjustment when

 

 

 

-2, -1, 0, +1, +2

very visible faded print results or

 

 

 

 

light specks (or streaks) result

 

 

 

 

when printing in Plain Paper/Black

 

 

 

 

setting.

 

 

 

 

Decrease the value if light specks

 

 

 

 

(or streaks) or snow flake like

 

 

 

 

printing results in high density

 

 

 

 

print areas.

 

 

 

 

 

 

 

 

Paper Color Setting:

Used for micro adjustment when

 

 

 

-2, -1, 0, +1, +2

very visible faded print results or

 

 

 

 

light specks (or streaks) result

 

 

 

 

when printing in Plain Paper/Color

 

 

 

 

setting.

 

 

 

 

Decrease the value if light specks

 

 

 

 

(or streaks) or snow flake like

 

 

 

 

printing results in high density

 

 

 

 

print areas.

 

 

 

 

 

 

 

 

Trnspr Black Setting:

As for Paper Black Setting above.

 

 

 

-2, -1, 0, +1, +2

 

 

 

 

 

 

 

 

 

Trnspr Color Setting:

As for Paper Color Setting above.

 

 

 

-2, -1, 0, +1, +2

 

 

 

 

 

 

 

 

 

SMR Setting:

To correct variations in print

 

 

 

-3, -2, -1, 0, +1, +2,

results caused by temperature/

 

 

 

+3

humidity conditions and difference

 

 

 

 

in print density/frequency.

 

 

 

 

Change the setting when print

 

 

 

 

quality is uneven.

 

 

 

 

 

Configuring Your Machine > 48