Connecting to a PBX

Private Branch Exchanges (PBXs) are private telephone systems used to route calls internally, for example, in a company. When dialing a telephone number, if a prefix (access) number is required to open an outside line, the line is connected to a PBX. If this unit is going to be connected to a PBX, please make the following changes to enable it to recognize the prefix digits in the telephone numbers used to obtain access to the outside line. After dialing the prefix digits, the unit will wait until the outside line is available (secondary dial tone detected) before dialing the rest of the number.

1.Press the Setup button on the control panel.

2.From the touch screen, press the Admin Setup button.

3.Using the on-screen keyboard, enter the administrator password and press Enter.

4.From the touch screen, press the Fax Setup button.

5.From the touch screen, press the Other Settings button.

6.From the touch screen, press the Arrow button and navigate to page 2.

7.From the touch screen, press the PreFix button.

8.Use the on-screen arrow buttons and keypad to enter the required prefix and press Enter.

9.Press Close (on four screens) to store the new setting and exit the menu.

Configuring Your Machine > 69