Muratec MFX-C3400 Copying, Increasing Number of Copies, Copy, Mono, Copy, Color, Copy Ready, Copy Ready, Basic Operation

Copying

NOTE

Copying will only occur when the selected tray (or one of the trays when Tray Selection is set to “Auto”) is defined as containing PLAIN media type. Refer to “Paper Setup” on page 32.

Basic Operation

1

2 3 4

1.Place your document(s) with text face UP in the ADF or face DOWN on the scanner glass.

2.If required, press the Copy button (1) on the control panel to prompt the Copy Ready screen.

NOTE

Factory default setting is Copy mode.

3.Press Mono (2) to copy your document(s) in black and white, or Color (3) to copy your document(s) in color.

NOTE

If you wish to cancel the copy process, press Stop (4) to abort the operation.

Increasing Number of Copies

The machine is preset to a copy count of 1. If you wish to increase the number of copies, select the number of copies with the numeric keypad.

To increase the number of copies:

1.If required, press the Copy button on the control panel to prompt the Copy Ready screen.

2.Enter number of copies required using the numeric keypad on the control panel. The touch screen display will confirm the copy count selected.

Operation > 75